TRIZ创新方法剖析路面渗水仪底座和路面的密封性能

针对路面渗水仪底座和路面的密封性能不良问题，运用TRIZ创新方法的因果链、技术矛盾、物理矛盾、进化分析等工具找到原因，获得解决方案。通过调研及试用，不断优化及调整所选方案，达到最优解决效果。应用效果证明TRIZ理论有助于创新并快速解决工程实际问题。     

基于CFD⁃DEM的水下切粒装置水室内颗粒流动过程数值模拟

基于CFD?DEM耦合方法，研究了颗粒在水室内的流动状态，分析了不同刀盘转速、粒子水通入量和水室出口角度对造粒过程的影响，发现提高刀盘转速、增加粒子水通入量和水室出口倾斜一定的角度都有利于水室内颗粒的排出。进一步研究了颗粒与碎屑在水室内的流动，发现在水室出口处二者的流动基本呈现出一定的分离角度。     

Three-dimensional coupling numerical simulation of two-phase flow and electrochemical phenomena in alkaline water electrolysis

Alkaline water electrolysis has the advantage of scalability for industrial-scale mass production of hydrogen; however, it is operated under a lower current density than other methods of water electrolysis because a high overpotential resulting from ion transport limitations will occur at high current density. Bubble dynamics can both prevent ion transport by its existence and accelerate it by bubble-induced flow. In this study, we conduct three-dimensional coupling numerical simulations of two-phase flow and electrochemical phenomena to elucidate the mechanisms by which microscale bubble dynamics influence ion transport and the cell overpotential. We find that the flow induced by rising microbubbles enhances ion transport to the anode and suppresses the cell overpotential. Moreover, bubble atomization further suppresses the overpotential because smaller bubbles approach the anode more closely than larger ones and accelerate ion transport to the anode surface.     

Type-II AsP/Sc2CO2 van der Waals heterostructure: an excellent photocatalyst for overall water splitting

In this work, we explore the application potential of AsP/M₂CO₂ (M = Sc, Zr) van der Waals heterostructures in photocatalytic water splitting through the first-principles calculations. The calculated results show that AsP/Zr₂CO₂ heterostructure possesses an unfavorable type-Ⅰ band alignment, whereas AsP/Sc₂CO₂ exhibits a desirable type-Ⅱ band alignment, which is beneficial for separating the photogenerated electron-hole pairs. Also, the band edge positions of AsP/Sc₂CO₂ heterostructure stride the redox potential of water, ensuring favorable reaction kinetics. Besides, the strong optical absorption of AsP/Sc₂CO₂ heterostructure in both visible and ultraviolet regions (especially up to 10⁻⁶ cm⁻¹ at about 250 nm) makes it possible to utilize solar energy effectively. Meanwhile, AsP/Sc₂CO₂ heterostructure has an exciton binding energy as low as 0.09 eV, which quantitatively illustrates the high separation efficiency of photogenerated charge carrier. Thus, the type-Ⅱ band alignment, suitable band edge position, strong light absorption, and low exciton binding energy together indicate that AsP/Sc₂CO₂ heterostructure is a potential photocatalytic material. In addition, the obvious redshift phenomenon in the optical spectrum of AsP/Sc₂CO₂ heterostructure shows that biaxial strain can improve its light capture capability. Also, the interconversion between type-Ⅱ and type-Ⅰ can be achieved by applying different strains. All these findings suggest that the novel AsP/Sc₂CO₂ heterostructure has significant application prospects in next-generation photovoltaic and photocatalytic devices.     

Extraction of protein from food waste: An overview of current status and opportunities

The chief intent of this review is to explain the different extraction techniques and efficiencies for the recovery of protein from food waste (FW) sources. Although FW is not a new concept, increasing concerns about chronic hunger, nutritional deficiency, food security, and sustainability have intensified attention on alternative and sustainable sources of protein for food and feed. Initiatives to extract and utilize protein from FW on a commercial scale have been undertaken, mainly in the developed countries, but they remain largely underutilized and generally suited for low-quality products. The current analysis reveals the extraction of protein from FW is a many-sided (complex) issue, and that identifies for a stronger and extensive integration of diverse extraction perspectives, focusing on nutritional quality, yield, and functionality of the isolated protein as a valued recycled ingredient.     

Effects of ultrasound-assisted resting on the qualities of whole wheat dough sheets and noodles

The effects of resting under ultrasonic treatment on the properties of whole wheat dough sheets and noodles were investigated. Compared with the control group, the resting time to reach the maximum breaking force and extensibility of whole wheat dough sheets treated with ultrasound was shortened by 20 min. The proportion of strongly bound water (T₂₁) decreased, while the proportion of weakly bound water (T₂₂) increased during resting, and the ultrasonic treatment could accelerate this moisture redistribution in the dough. The extent of the increase in gluten macropolymer and the decrease in –SH content of ultrasound-treated wheat dough was higher than that of the control one during the initial 5–15 min resting, which could be related to the improvement of whole wheat dough extensibility. Whole wheat noodles showed a better breaking distance for 10 min of ultrasonic-assisted resting. Ultrasonic treatment could be used to reduce the resting time of whole wheat dough sheets and improve the texture properties of noodles.     

金针菇多糖对微冻大黄鱼及其鱼片品质变化的影响

为研究金针菇多糖（polysaccharide from Flammulina velutipes，FVP）对微冻大黄鱼及鱼片在贮藏期间肌原纤维蛋白性质的变化及水分分布的影响，实验分别选用0.03、0.06、0.09 g/L FVP浸渍处理大黄鱼和鱼片，以无菌水处理为对照组，分析微冻贮藏期间样品的感官指标得分、总挥发性盐基氮含量、总巯基含量、Ca2＋-ATPase活性、蛋白流变学性质以及水分迁移变化规律。结果表明：FVP可有效抑制整鱼总挥发性盐基氮含量上升和感官得分的下降；减缓整鱼及鱼片在微冻过程中总巯基含量、Ca2＋-ATPase活性下降和水分流失；此外FVP还能够延缓大黄鱼因腐败而出现的蛋白凝胶能力减弱。在本实验选取的多糖浓度范围内，0.09 g/L FVP处理组保鲜效果较强。该研究结果可为FVP用于水产品贮运保鲜提供理论参考。     

三门峡水库汛期排沙效果研究

三门峡水库汛期排沙是解决泥沙淤积问题、控制潼关高程的关键途径。"蓄清排浑"运用以来,非汛期蓄水期库区发生淤积、汛期降低水位运用排泄全年泥沙,基本保持了库区动态冲淤平衡。不同控制水位和入库流量过程存在不同的排沙效果,针对三门峡水库汛期排沙过程的差异,对"蓄清排浑"运用以来汛期排沙特征进行统计,分析了水库敞泄和不同控制水位运用对排沙效果的影响。结果表明,在汛期平水305 m、洪水敞泄的运用条件下,水库排沙具有多来多排的特点,汛期排沙总量与入库含沙量和水量密切相关;完全敞泄时库区冲刷取决于流量大小和敞泄时间,净排沙效率随着水量的增加和敞泄时间的延长而减小,冲刷效率降低;汛期控制运用期,当流量在1000 m~3/s以上时、水位在305～311 m也会产生一定的排沙,排沙效果取决于含沙水流在壅水段的滞留时间和出入库流量之比。研究成果可为三门峡水库运用方式的优化提供依据。     

平行流式电机周向水套结构参数对散热性能影响研究

针对电力机车上某功率密度为1.27 kW/kg的平行流式电机周向水套结构的散热问题进行了研究。首先利用热阻网络法建立了平行流多通道截面的热阻数学模型;然后借助FLUENT软件对水套的电机散热过程进行了数值模拟,并对结构参数进行了优化;最后通过实验验证了计算的正确性。结果表明:当通道孔数n增大时,总热阻普遍减小;当通道单孔宽度x增大时,总热阻先增大后减小,当n=6个、x=1.670 mm时,水套具有最佳的散热性能;水套各测温点的数值模拟温度与实验测量温度之间的相对误差均低于5.00%。